1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old batteries and replace with one 1.5V AAA size alkaline
batteries.
3. Close the battery cover. If the battery are inserted correctly, you will
hear a beep afterwards.
NOTE:
• Replacing the battery does not affect the test results stored in the memory.
• As with all small battery, these batteries should be kept away from children.
If swallowed, promptly seek medical assistance.
• Battery might leak chemicals if unused for a long time. Remove the batteries
if you are not going to use the device for an extended period (i.e., 3 months or
more).
• Properly dispose of the batteries according to your local environmental
regulations.
Caring for Your Meter
To avoid the meter and test strips attracting dirt, dust or other
contaminants, please wash and dry your hands thoroughly before use.
Cleaning
● To clean the meter exterior, wipe it with a cloth moistened with tap
water or a mild cleaning agent, then dry the device with a soft dry cloth.
Do NOT rinse with water.
● Do NOT use organic solvents to clean the meter
Meter Storage
● Storage conditions: -20°C to 60°C (-4°F to 140°F), below 95% relative
humidity.
● Always store or transport the meter in its original storage case.
● Avoid dropping and heavy impact.
● Avoid direct sunlight and high humidity.
28