Download
Share
Print this page
RODE Microphones NT4 Instruction Manual
  1. Manuals
  2. Brands
  3. RODE Microphones Manuals
  4. Microphone
  5. NT4
  6. Instruction manual

RODE Microphones NT4 Instruction Manual

Stereo condenser microphone
Hide thumbs Also See for NT4:

Advertisement

Quick Links

Download this manual
NT4
Instruction Manual
www.rodemic.com
( EMC, LVD )

Advertisement

loading

Related Manuals for RODE Microphones NT4

Summary of Contents for RODE Microphones NT4

  • Page 1 Instruction Manual www.rodemic.com ( EMC, LVD )
  • Page 2 NT4 lets you record any source with immaculate stereo detail. The NT4 has a 128 dB dynamic range, 143 dBA SPL and low self-noise. Offering selectable battery or phantom power operation with power indicator light, the NT4 is ideally suited to both studio and location recording.

  • Page 3: Specifications

    Specifi cations Acoustic Pressure gradient Principle: Directional Cardioid (per capsule) Pattern: (see graph) Frequency 20 Hz - 20 kHz Range: (see graph) Output 200 per side Impedence: Sensitivity: -38 dB re 1 Volt/Pascal (12 mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise: <16 dB SPL (A - weighted per IEC651) Maximum...
  • Page 4 Specifi cations Frequency Response Polar Response -2.0 -10.0 -20.0 Features • Stereo XY condenser microphone • Dual externally biased 1/2” capsules with gold sputtered diaphragm • Capsules closely matched with full frequency response • Dual power operation • Custom stereo cables included - dual XLR and mini stereo jack •...
  • Page 5 NT4-DXLR stereo XLR lead NT4-MJ XLR to 3.5mm stereo cable Powering the NT4 • The NT4 can be powered by either phantom power (see specifi cations) or a 9V battery. • If phantom power is not available on your equipment, you will need to use battery power. To use battery power, a 9 Volt (PP3) battery should be fi...
  • Page 6 • If a battery is installed but phantom power is available, current will not be drawn from the battery. • When the NT4 is switched ON, the red battery status LED gives an indication of battery power and should always be carefully observed. When the LED fl...
  • Page 7 Connecting the NT4 • The NT4 is supplied with both a dual XLR cable (NT4-DXLR), and a stereo mini-jack cable (NT4-MJ). • The NT4 may be connected directly to two channels of a mixer using the twin XLR cable (marked L and R) supplied, with each channel panned left and right as required.
  • Page 8 ‘space’ that only a true stereo microphone like the NT4 can capture. • The two capsules used in the NT4 measure 1/2” in diameter and have a cardioid polar pattern. The cardioid patterns pick-up sound from in front of the microphone and reject sound from the rear.
  • Page 9 NT4 produces a ‘real’ sounding kit. This method is very quick and easy. There is no need to worry - 9 -...
  • Page 10 • Piano: Placed strategically above a grand piano, the NT4 easily and clearly produces the true, stereo image of that instrument. • Guitar: Acoustic guitar performances (duo or...
  • Page 11 • Like all condenser microphones, the NT4 should be kept dry and clean at all times. • The NT4 is a precision transducer and you should be careful not to drop or knock it as this could cause serious damage.

  • Page 12: Warranty

    Warranty microphones are warranted for one year from date of purchase. You can extend that to a full ten years if you register online at www.rodemic.com. The warranty covers parts and labour that may be required to repair the microphone during the warranty period.