Advertisement
Quick Links
Advertisement
Related Manuals for RODE Microphones NT6
Summary of Contents for RODE Microphones NT6
- Page 1 Instruction Manual www.rodemic.com ( EMC, LVD )
- Page 2 We at RØDE would like to thank you and congratulate you on investing in the RØDE NT6 Compact Condenser Microphone with Detachable Capsule. The RØDE NT6 is specifi cally designed for diffi cult mounting applications. Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where a small and unobtrusive, yet powerful microphone system is required.
-
Page 3: Specifications
Specifi cations Acoustic Pressure gradient Principle: Directional Cardioid (see graph) Pattern: Frequency 40Hz-20kHz, selectable HPF @ Range: 80Hz/12dB/octave (see graph) Output 200 Impedence: Sensitivity: -37 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise: 19 dB SPL (A - weighted per IEC651) Maximum... - Page 4 Specifi cations Dimensions 188.4 mm (7 3/8”) 88.5 mm (2 4/8”) Ø 20 mm (13/16”) Ø 13 mm Ø 18 mm 1/4” x 20 tpi 3/8” x 16 tpi 5/8” x 27 tpi Frequency Response Polar Response - 4 -...
- Page 5 Features • Externally biased condenser • Gold sputtered 1/2” capsule • Two position PAD - 0dB and -10dB • Two position High-Pass Filter - fl at and 80Hz • Convenient two-axis swivel mount and 3m Kevlar ® fi bre reinforced cable included •...
- Page 6 Mounting the NT6 • The NT6 is supplied with a selection of fi ttings and adaptors designed to ease positioning and mounting. The NT6 head attaches to a 2-axis swivel-mount that allows it to independently move and lock in position.
- Page 7 (body) as required. Like the head, the pre-amplifi er is designed to be positioned and/or mounted in several ways. • The NT6 comes complete with an RM5 Stand Mount. When connected to a mic stand the RM5 securely holds the pre-amplifi er in position. This...
- Page 8 Connecting the miniature cable • With the head and pre-amplifi er in position and the XLR cable connected to the back of the pre-amplifi er, it is time to connect the mini-XLR connectors. • With the pre-amplifi er assembly in one hand and the mini-XLR in the other, align the key on the connector to the groove on the back of the pre- amplifi...
- Page 9 Connecting the miniature cable – The miniature connection cable is Kevlar ® fi bre reinforced and designed to withstand considerable tensile and compressive forces, however inside this sheath are three copper wires. – Always ensure the connectors are correctly aligned groove-to-key when connecting the miniature connector’s and do not use excessive force when inserting and withdrawing.
- Page 10 Using the NT6 • The NT6 is a phantom powered microphone. To operate correctly it requires a 24V or 48V phantom supply from the mixing console or other source. • It is recommended that you use a high-quality microphone lead from the preamp body to the recording device or mixing console, and keep it as short as practical for your application.
- Page 11 • A small screwdriver or pen can be used to alter the switch positions as required. Storage • After use the NT6 head should be wiped with a dry, soft cloth, and both head and body placed in the protective case.
-
Page 12: Warranty
Warranty All RØDE microphones are warranted for one year from date of purchase. You can extend that to a full ten years if you register online at www.rodemic.com. The warranty covers parts and labour that may be required to repair the microphone during the warranty period.