Table of Contents
Advertisement
2 OVERVIEW
Rear Panel
The rear panel contains a switched power outlet; connectors for video, audio, and RF
cabling; data output; and modem and data interface connectors. Some connectors are
not enabled and require the support of application software.
Figure 2-2 Rear panel
Table 2-2 Rear panel connections
1
Cable In — Connects to cable signal from your service provider
2
RF Out — Ch 3/4 modulated audio/video (SDTV) to DVD players or VCRs
3
M-Card — Inserted M-Card)
4
Serial — Service only
5
S-Video — Connects to S-Video (SDTV) input of TV or VCR
6
Digital Audio (S/PDIF) — Provides Dolby® Digital 5.x audio or PCM output
7
YPbPr — Component video output (HDTV)
8
Video/Audio — Composite Video (SDTV) /Audio inputs and outputs
9
HDMI — High-Definition TV (HDTV) connector
10
Ethernet* — Network connection
11
USB* 2.0 — High-Speed peripheral device connection
12
IEEE-1394 — Audio and video device connection
13
Power cord connector
* Availability of certain features is dependent upon application support.
M-Card™
The M-Card is required to view cable television programs, previously recorded programs
on the DVR, or interactive on-demand programs. The M-Card should not be removed.
7
Advertisement
Table of Contents
