Honeywell Genesis 7580g User Manual page 18

USB Interface with EAS
1. Connect the appropriate interface and EAS cable to the device, and then to the computer.
2. The scanner beeps.
3. Verify the scanner operation by scanning a bar code from the
The unit defaults to a USB PC Keyboard. Refer to
For additional USB programming and technical information, refer to "USB Application Note," available at
wellaidc.com.
1 - 4
USB with EAS Connection:
Close-up of EAS
Connection:
page 2-3
Checkpoint
Wires
Sample Symbols in the back of this manual.
for other USB terminal settings.
www.honey-