Table of Contents
Advertisement
EAS Interlocked Duration Timeout
When using the Interlocked EAS Mode of Operation, you must set the lag time between when a bar code is read and
when the EAS tag is deactivated. Use this selection to set this timeout (in milliseconds). After scanning the EAS Inter-
locked Duration Timeout bar code, set the timeout duration (from 0-5000 milliseconds) by scanning digits on the
Programming Chart
inside the back cover, then scanning Save. Default = 100 ms, which is 0.1 second.
EAS Interlocked Duration
Timeout
7 - 3
Hide quick links:
Advertisement
Table of Contents
