UPC-A
UPC-A On/Off
* On
Note: To convert UPC-A bar codes to EAN-13, see
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not.
Default = On.
* On
UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the beginning of the scanned data, but the unit can
be programmed so it will not transmit it. Default = On.
* On
<Default All UPC-A Settings>
Convert UPC-A to EAN-13
Off
on page 6-24.
Off
Off
6 - 19