Honeywell Genesis 7580g User Manual page 105

EAN/JAN-13 Check Digit
This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not.
Default = On.
* On
EAN/JAN-13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data. Default = Off for both 2 Digit and 5 Digit
Addenda.
2 Digit Addenda On
5 Digit Addenda On
EAN/JAN-13 Addenda Required
When Required is scanned, the scanner will only read EAN/JAN-13 bar codes that have addenda. Default = Not Required.
Required
* Do not Convert UPC-A
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
6 - 25