Configuring Msi Bar Codes; Configuring Codabar Bar Codes - Avery Dennison Pathfinder 6057 System Administrator Manual

Configuring MSI Bar Codes

1. To configure MSI settings, select MSI from the Scanner
Configuration window.
2. Enable each bar code you need to scan.
Allows the scanner to scan MSI bar codes.
MSI
Tells the scanner to return the check digit with the data
Transmit
when an MSI bar code is scanned.
CD
Tells which algorithm to use to ensure the integrity of a
Mod
two-check digit MSI bar code.
10/11 CD
Scheme
Tells the number of check digits that MSI bar codes
Use 2
should have.
CDs
Note: Check digits are not always returned with the data.
Variable, specifies that MSI bar codes can be any length.
Lengths
Sets the
Note: Specifying a range of lengths increases the likelihood of unsuccessful scans.
length(s)
1 Fixed, specifies a single length for valid MSI bar codes. The range for Length 1 is
for MSI
1 – 99. The default is 6.
bar
2 Fixed, specifies two lengths for valid MSI bar codes. The range for Length 2 is
codes.
1 – 99. The default is 55.
3. Touch Back to save all the settings and return to the Scanner Configuration window.

Configuring Codabar Bar Codes

1. To configure Codabar settings, select Codabar from the Scanner
Configuration window.
2. Enable each bar code you need to scan.
Allows the scanner to scan Codabar bar codes.
Codabar
Tells the scanner to strip the start and stop characters
NOTISEdit
from scanned Codabar bar codes.
Tells the scanner to strip the start and stop characters
CLSIEdit
from 14-character Codabar bar codes and insert spaces
after the first, fifth, and tenth characters.
Note: The 14-character length does not include start
Variable, specifies that Codabar bar codes can be
Lengths
Sets the any length.
length(s)
Note: Specifying a range of lengths increases the likelihood of
for
Codabar
1 Fixed, specifies a single length for valid Codabar bar codes.
bar codes.
The range for Length 1 is 1 – 99. The default is 5.
2 Fixed, specifies two lengths for valid Codabar bar codes. The range
for Length 2 is 1 – 99. The default is 55.
3. Touch Back to save all the settings and return to the Scanner Configuration window.
5-8 System Administrator's Guide
If you choose two check digits, you must choose a
check digit algorithm.
and stop characters.
unsuccessful scans.