Using Aquos Link - Sharp Aquos LC-70UD1U Operation Manual

Other Viewing Options
Oe% e - e - -e e = = i
2
To operate the connected equipment, press STB,
DVD_VCR or AUDIO to select your device. (STB
(cable/saiellite set top box), BD, DVD, VCR or
AUDIO.) The remote control unit button will function
as follows.
® When you operaie VCR, DVD or BD, press INPUT
to select the terminal connected to your device.
® CABLE and SAT cannot be selected at the same
time.
1 rPowE i-3
lid
OPTION SLEEP AUDIO FREEZE -- 10
E_ E_ E_ E_
@@N
@N@
--11
POWER (SOURCE)
• Turns the connected equipment power on and off.
, Starts playback. (VOR, BD, DVD)
3 _1
, Rewinds the tape and allows picture search. (VCR)
• Hold down to go in reverse. (BD, DVD)
4m
, Stops the tape transport. (VCR)
, Playback stops when pressed. With some Blu-ray
disc/DVD players, pressing the button twice may
open the disc tray. (BD, DVD)
, Pressing quickly once takes you to the start of the
chapter currently playing. Each time you press
it, you move back to the start of the previous
chapter. (BD, DVD)
6 0-9, ,_ (DOT}
, Press a button (or buttons) that corresponds to
the channel that you wish to watch.(STB)
7 I_"
• Rapidly advances the tape and allows picture search.
_VCR)
° Hold down to fast forward. (BD, DVD)
8||
° Sets pauses and still pictures. (VCR, BD, DVD)
, Pressing quickly once takes you to the start of the
next chapter. Each time you press it, you move
ahead to the start of the next chapter. (BD, DVD)
10 ®REC
, Starts recording. (VCR)
11 FLASHBACK
, Press to switch between the current channel
and the channel you were watching immediately
before. Some manufacturers do not preset
FLASHBACK. (STB)
12 CHA/V
, Press CHA or CH v to tune in to a higher or
lower channel. (STB)
, Press to select the channel of the TV tuner on the
VOR. (VOR)
13 MENU
, When this button is pressed, the BD/DVD menu
will display. (BD, DVD)
14 A/T/41/_, ENTER
" _,/Y/_I/I_ : Press the button to select kems on
the STB GUIDE screen or STB MENU screen.
(STB)
Press the button to select items on the BD/DVD
menu screen. (BD, DVD)
, ENTER: Press to activate the selected function.
(STB, BD, DVD)
Using AQUOS LiNK
What's AQUOS LINK?
, Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LiNK you can interactively operate
compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).
, By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or
AV amplifier using the remote control of the TV.
, AQUOS LiNK allows you to operate the HDMI-connected equipment wkh one remote control.
Example
* Us_c_tnt.HDMI-certified cable * _]_ARC
, ...................
Back panel Back panel
horizontal inputs vertical inputs
F--1
AQUOS LINK-compatible
AQUOS BD player audio system
, For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.
, Point the remote control toward the TV, not to connected HDMI equipment.
, Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMl-certified cable.
, Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system.
, These operations affect the HDMI equipment selected as the current input source. If the equipment does not
operate, turn on the equipment and select the appropriate input source using INPUT.
, The AQUOS LINK feature may not operate properly when an HDMI splitter or AV selector unk is used. These devices
may cause interruptions to the image and/or sound.
Connected AQUOS LINK-compatible devices can be operated without changing the settings of the remote control
unit.
The OPTION button will function only when AQUOS LINK is used.
[] One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.
[] One Touch Recording
Press OREC while you are viewing a broadcast received with the AQUOS LINK_compatible recorder. The AQUOS
LiNK automatically recognizes the connected HDMI device and starts recording.
[] Single remote control
The AQUOS LINK automatically recognizes the connected HDMI device and you can control the TV and the devices
as if using a universal remote control.
[] Control the AQUOS LINK-compatible audio system
Set the volume of AQUOS LINK-compatible audio system.
, The above description is an example of the AQUOS LiNK function.
, The steps in "AQUOS LINK Setup" on page 39 need to be completed beforehand.
, Refer to this operation manual and the operation manual of the AQUOS LiNK device to be used with this TV.
_- 38