Sharp Aquos LC-70UD1U Operation Manual page 25

On=Screen Display Menu
Io A - e| o.
Power control setting allows you to save energy.
, For operating the on-screen display menu, see page 19.
' :_i ' #_ .......
When listening to music from a music program, you
carl turn the screen off and enjoy audio only.
, The screen image will return to normal when a button
(except those for audio adjustment, such as VOL,
MUTE) is pressed.
This function allows you to set the Power Saving
level in order to decrease the power consumption
and increase the backlight lifespan.
Standard: Optimizes power reduction based upon
video content. When set to "Standard", "_?'
appears on the screen.
Advanced: Optimizes power reduction based upon
video content and engages OPC. When set to
"Advanced",
"S_}" appears on the screen.
Off: This function does net work.
, "Power Saving" does not function when you set AV
MODE to "DYNAMIC (Fixed)".
, You cannot select a different Power Saving Rein for
each AV MODE.
When "Power Saving" is set, the "OPC" settings for all
AV Modes will automatically change.
-- If you set "OPC" to "On" when "Power Saving" is
set to "Standard", then the "Power Saving" setting
will change to "Advanced".
-- When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be
set to "Off".
- "DYNAMIC (Fixed)" will remain set to "Off".
, When "Power Saving" is set to "Standard" or
"Advanced", the Power Saving leaf icon appears to the
left of "OPC" in the Picture Settings menu screen.
, "Power Saving" is not available when the TV is in 3D
mode.
When this function is enabled, the /_/automatically
shuts down if no signal is received for more than 15
minutes,
, When it is 5 minutes before the power shuts down,
the remaining time will start to keep appearing every
minute.
, When a TV program finishes, this function may not
operate.
When you enable this function, the /_/automatically
shuts down if no operation is performed for more
than 3 hours.
, When it is 5 minutes before the power shuts down,
the remaining time will start to keep appearing every
minute.
, For operating the on-screen display menu, see page 19.
These functions are useful for adjusting the audio
and video settings. The View Option functions can
be operated with the remote control unit.
The application window carl be displayed by
selecting "APPS" ors the MENU screen.
, You can display the application window by pressing
SmartOentral on the remote control unit. (See page
15.)
w_ _a
This function changes the screen size.
Select "View Option" on the menu te display the
View Mode menu screen.
The View Mode menu varies depending on the input
source.
, You can select View Mode by pressing VIEW MODE
on the remote control unR.
-- See pages 17 and 18 for adjusting the video being
input from a TV, other audiovisual equipment,
USB-Video, SD-Video, DLNA-Video or Internet
applications.
-- See page 18 for adjusting the video being input from
Allows you to change the Closed Caption display.
Select "Change CC" ors the menu to display the
Closed Caption inforrnation.
, The information displayed varies depending on the
program you are watching.
You can change Closed Caption by pressing CC on
the remote control unit. See page 17 for details of
Closed Caption function.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal is
connected to the DIGITAL AUDIO OUT terminal on the
TV. Please selec£ an audio oLRpLR format compatible with
the audio format of the program you are watching and
the equipment connected.
PCM: For connecting to equipment that does not
support Dolby Digital and DTS. The same audio
(main, sub, or main/sub) as the audio of the
program being viewed is output.
2-channel audio wRh a sampling rate of 48 kHz or
less is output as linear PCM audio.
Bitstrearn: For connecting to an audio system that
supports Dolby Digital and DTS. Audio is output
through both the main and sub channels.
a PC.
Analog channel audio and video input audio are output
in POM mode even when "BRstream" is selected.
POM digital input signals are output in PCM mode
even when "Bitstream" is selected.
, You can select Freeze by pressing FREEZE on the
remote control unit. See page 15 for details of Freeze
function.
Allows you to change the audio when multiple audio
is available for the program you are watching.
If you connect external equipment to an HDMI
IN terminal which you have set to be skipped, a
notification message appears on the display when
a signal is received from the connected external
equipment. Press "Yes" to reset the related skipping
setting so that the input terminal becomes available.
, You can change Audio by pressing AUDIO on the
remote control unit. See page 16 for details of Audio
function.
@- 23