Sharp Aquos LC-70UD1U Operation Manual page 52

Appendix
iiiiiii#i ...... CLEARING THE SECRET NUMBER
The example of an error Error
message displayed on a code
screen
Possible Solution
, Failed to receive E202
broadcast.
, No broadcast now. E203
, An incompatible
audio signal has been
received. Check the
output device settings.
, Check the antenna cable. Check that the antenna is correctly setup.
, Check the broadcast time in the program guide.
, This message is displayed when an audio format other than PCM, DTS or
Dolby Digkal is input.
Set the audio output format of connected external HDMI equipment to
PCM, DTS or Dolby Digkal.
Refer to the operation manual of the external equipment for setting
details.
You can read the software licenses in the on-screen display menu. Refer to "lnformatien" > "Software
License".
If you forget the secret number, clear the secret number using the following procedure.
1 Select an item from the list below to display the secret number input screen. (For operating the on-
screen display menu, see page 19.)
, "Color system" (_ "Terminal Setting", System Options menu).
, "EZ Setup" or "Reset" {_ InRial Setup menu).
, "OH Setup" (_ "Broadcasting Setup" _ InRial Setup menu).
, "Parental CTRL" (_ "individual Setup", initial Setup menu).
• "Interactive Service" (_ "lntemet Setup" _ Initial Setup menu).
, "Software Update" {_ Information menu).
2 Press and hold both CNA and VOL + on the TV simultaneously until the message appears on the
screen.
The secret number is LL_"
, As a precautionary measure, make a note of your secret number above, and keep R in a safe place.
[] Software composition
The software included in this product is comprised of various software components whose individual
copyrights are held by SHARP or by third parties,
Cautions regarding use in high and low temperature environments
, When the unk is used in a low temperature space (e.g. room, office), the picture may leave trails or appear
slightly delayed. This is not a malfunction, and the unR will recover when the temperature returns to normal.
, Do not leave the unR in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight
or near a heater, as this may cause the cabinet to deform and the front panel to malfunction.
Storage temperature: - 4°F to _ 140°F (- 20°0 to _ 60°0)
_- 50