KVH Industries TracVision G6 Technical Manual page 92

Selecting Active Satellite
These screens are only seen if the GyroTrac ADCU is connected to a
TracVision G6.
After installing the active pair of satellites, use the Select Satellite
menu to choose which of the installed satellites will be active.
Sat Name A
corresponds to the
first satellite selected
during the Install
Satellite process.
54-0161
Select Satellite?
Enter Next Return
Select <SAT NAME A>
Yes Next Cancel
<SAT NAME A> selected
Figure 3-34
Select Active Satellite
Proceed to "Updating Satellite
Frequency Data"
Select <SAT NAME B>
Yes Next cancel
<SAT NAME B> selected
Using the ADCU Interface
Sat Name B
corresponds to the
second satellite
selected during the
Install Satellite
process.
89