KVH Industries TracVision G6 Technical Manual page 45

TracVision G6 Technical Manual
Figure 2-29
Attaching the Terminal Strips
to the ADCU
Double-check all wiring. Be certain
to plug terminal strips into the
correct positions. If wiring is
incomplete or incorrect or the
terminal strips exchange positions,
serious electrical damage can
occur to the TracVision antenna
unit, the GyroTrac, and interfacing
electronics.
Figure 2-30
Proper Terminal Strip Order
40
Connecting the Terminal Strip Connectors to the ADCU
Now that you have connected all wires to the terminal strip
connectors, insert the connectors into the ADCU's rear panel as
shown in Figure 2-29.
Be sure to attach the terminal strip connectors in their correct
positions, as shown in Figure 2-30.
Connectors 60 - 37
60 59 58 57 56 55 54 53 52 51 50 49
Yellow Label
Green Label
1 2 3 4 5 6 7 8 9 10 11 12
Connectors 1 - 36
48 47 46 45 44 43 42 41 40 39 38 37
Red Label
Blue Label
13 14 15 16 17 18 19 20 21 22 23 24 25 26
Maintenance Port
White Label
27 28 29 30 31 32 33 34 35 36
54-0161