Britax ADVOCATE User Manual page 21

BRITAX Child Safety, Inc.
d. Pull the end of
the belly pad and
buckle retainer
out of the buckle
slot in the cover to
remove.
e. Turn the buckle
retainer sideways
and slide the buckle
out of the belly pad.
5. Detach the hook and
loop fasteners on the
head restraint cover from
around the harness.
6. Remove the head
restraint cover.
a. Raise the harness
to the highest
position.
b. Detach the elastic
straps from the tabs
and the hook and
loop fastener from
behind the harness
height adjuster.
7. Adjust the harness to
the lowest position and
detach the plastic hooks
from the bottom edge of
the child seat.
8. Detach the plastic hooks
from the back of the child
seat shell.
9. Remove the cover from
the shell.
36
4d
4e
Cleaning the Cover
• HAND WASH the cover using cold water and mild soap.
• LINE DRY to prevent the cover from shrinking.
• DO NOT:
– Bleach
– Machine wash
– Machine dry
– Iron
Replacing the Cover
1. Fit the child seat cover
around the child seat
shell.
2. Attach the plastic hooks
behind the head restraint
onto back of the child
seat.
3. Replace the belly pad and
buckle:
a. Turn the buckle
retainer sideways
and route it through
the belly pad.
b. Route the belly pad
and buckle retainer
through the buckle
slot in the cover.
– Ensure that the
buckle is through
the desired cover
slot for the buckle
position.
c. Slide the end of the
belly pad over the
comfort foam on the
child seat.
d. Turn the buckle
retainer sideways
and route it through
the front buckle
slot and then into
the desired buckle
position in the child
seat.
ADVOCATE User Guide
3a
3b
3c
3d
37