Incompatible Vehicle Seat Belts; Care And Maintenance; Seat Cover - Britax ADVOCATE User Manual

BRITAX Child Safety, Inc.
c. Tightens by feeding
the belt webbing
back into the
retractor.
2. Locking Latch Plate
a. Has a latch plate
that prevents the
webbing from
becoming loose.
NOTE: Ensure the latch
plate and vehicle belt
lie flat against the child
seat or the vehicle belt
may remain unlocked.
b. Tightens by pulling
on the belt webbing.

Incompatible Vehicle Seat Belts

The following types of vehicle seat belts are NOT
compatible with this child seat. If any of the belt types
listed below are in the chosen seating position, choose
another vehicle seating position or check your vehicle
owner's manual for information on installing a car seat in
your vehicle.
Lap belts with a
Lap-shoulder belts
sewn-in latch plate
with top or bottom
anchor points on that have a retractor
that locks only in
the vehicle door�
case of a sudden
stop�
Lap belts forward
Motorized,
of the vehicle seat
automatic vehicle
bight�
seat belts�
34
Latch plate
Adjuster
Lap-shoulder
belts that have a
separate retractor
each for the
lap section and
shoulder section�

Care and Maintenance

Seat Cover

Removing the Cover
Never remove the buckle tongues from the harness.
They cannot be reattached after removal. If reassembled
incorrectly, the child seat may not perform as intended.
1. Loosen and unbuckle the
harness.
a. Lift harness adjuster
lever.
b. Pull both harness
straps forward.
c. Unbuckle the
harness.
2. Open the chest clip.
a. Press tabs
b. Pull apart
3. Remove the infant
positioning pillow if
necessary.
4. Remove the belly pad and
buckle.
a. Lift the cover from
the seat to find
the buckle strap
connection.
b. Remove the buckle
strap by turning
the buckle retainer
sideways and
routing it out of the
front buckle slot in
the child seat (see
page 38).
c. Slide the end of the
belly pad over the
foam pad on the
seat.
ADVOCATE User Guide
1b
1a
b
a
4a
4b
4c
35