Billion BiPAC 5400N R2 Quick Start Manual
  1. Manuals
  2. Brands
  3. Billion Manuals
  4. Wireless Router
  5. BiPAC 5400N R2
  6. Quick start manual

Billion BiPAC 5400N R2 Quick Start Manual

Wireless-n adsl2+ firewall router
Hide thumbs
Table of Contents

Advertisement

Quick Links

BiPAC 5400N R2
Wireless-N ADSL2+
Firewall Router
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BiPAC 5400N R2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Billion BiPAC 5400N R2

Summary of Contents for Billion BiPAC 5400N R2

  • Page 1 BiPAC 5400N R2 Wireless-N ADSL2+ Firewall Router Quick Start Guide...

  • Page 2: Package Contents

    Billion BiPAC 5400N R2 Wireless-N ADSL2+ Firewall Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON THE CD-ROM.

  • Page 3: Hardware Overview

    Quick Start Guide Hardware Overview The Front LEDs Lit green when WAN port gets IP Flash green when address successfully. Unlit when Lit green when connected WPS configuration is the device is in bridge mode or to an Ethernet device. in progress.

  • Page 4: Hardware Connection

    Billion BiPAC 5400N R2 Wireless-N ADSL2+ Firewall Router Press it to reset the device to restore or factory default settings. Hardware Connection...

  • Page 5: Hardware Installation

    Quick Start Guide Hardware Installation 1. Power Connection Plug the supplied power adapter to the wall jack and the other side to the router. Please note that the plug type may differ according to country. 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other side to the PC’s Ethernet interface.
  • Page 6 Billion BiPAC 5400N R2 Wireless-N ADSL2+ Firewall Router 4. Splitter/ Micro-filter Connection Splitter / Micro-filter are important for ADSL installation. High-frequency signals are directed to the ADSL modem, and low-frequency signals are directed to the telephone or other analog voice-channel device to prevent inter-modulation distortion and also to get good speed and stable ADSL sync rate.

  • Page 7: Troubleshooting

    Most problems can be solved by referring to the Troubleshooting section in the User Manual. If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product. Contact Billion WORLDWIDE http://www.billion.com BiPAC 5400N R2: V1.00EN...

Table of Contents