Planet HPOE-2400G User Manual page 41

• Temperature Threshold
• Power Allocation
• PoE Function
• Power Mode
• Priority
• Device Class
• Current Used [mA]
• Powered Used [W]
• Power Limit [W]
• Apply
• Refresh
Table 4-5-2: Descriptions of the Poe Configuration Web page screen Objects
PoE Unit Temperature
50
51
54
57
Allows user to set a temperature for alerting system log and syslog once PoE unit
temperature over temperature threshold.
Also, the threshold offers a standard for Over Temperature protection to function.
Display current total power consumption status.
Allows user to disable or enable per port PoE function.
Allows user to select IEEE 802.3at / IEEE 802.3af mode for port. Please be noticed
that PoE device may not be offered enough power if the PoE device is supported
IEEE 802.3at but user select IEEE 802.3af mode, because IEEE 802.3af mode is
delivering 15.4 watts maximum only, and also system reserve 15.4 watts only for the
PoE device if it is supported Class4 level.
Allows user to set PoE port priority. There are 3 level could be configured, they are
Critical, High and Low. The Critical is highest priority and Low is lowest priority.
This function is worked under Priority power limit mode only.
Display PoE class level. The IEEE 802.3af standard offers PoE class level from 1 to
3 and IEEE 802.3at standard offers the class from 1 to 4.
Display PoE device current.
Display PoE device power consumption.
Allows user to custom power for port. This function is worked under Total Limit
power limit mode. This function also related to Power Mode. If Power mode is
802.3af then user can allocate to 15.4 watts maximum, otherwise user can allocate
to 30 watts.
Press this button to take effect.
Press this button to refresh current Web page.
41
User's Manual of HPOE-1200G / HPOE2400G
PoE Power Budget
460 watts
450 watts
440 watts
430 watts