Advertisement
Table of Contents
- 1 Package Contents
- 2 Device Overview
- 3 Hardware Installation: Homeplugav Adapter
- 4 Hardware Installation: the Aztech Hpcam Camera
- 5 Add the Plugcam Camera
- 6 QR Code Scan (Ideal for Camera at Hand and for First Time Setups)
- 7 Manual (Manually Type in Camera ID and Camera Password)
- 8 Monitoring
- Download this manual
See also:
User Manual
The HIPC700 Easy Start Guide is designed to get you up and running with your
HIPC700 device. This Easy start Guide along with the User Manual which provides a
more advanced guide to this product is downloadable on our Aztech Support Website
(www.aztech.com/support).
Package Contents
Aztech HIPC700
3
2
+
Search and download the PlugCam App on
Apple Store or Google Play to your Mobile
device.
Power Cord
Easy Start Guide
+
Hardware Installation: HomePlugAV Adapter
NOTE: Ensure that you have a HomePlug AV adapter available for your camera.
1
WARNING : If you have an existing HomePlug AV network there is no need to
connect another HomePlug AV to the ethernet port of the router.
+
Hardware Installation: The Aztech HPCam Camera
Step 1: Place your HPCamera anywhere in the house, plug it to a power
Step 4:
outlet and switch on the HPCamera. The HPCamera and HomePlug AV
adapter will connect with each other automatically.
NOTE: During HP Camera's Initial start-up, you may check whether the HP Camera
IR LEDs are working properly by covering its light sensor above the lens and
confirm if the IR LEDs turn red.
The PlugCam App
Device Overview
A
B
C
D
Step 1 :
Connect one end of the ethernet cable to any of your router's
Ethernet LAN ports.
Step 2 :
Connect the other end of the ethernet cable to the LAN port of
your homeplug AV Adapter.
Step 3 :
Plug your Homeplug AV Adapter to the power outlet.
Place your HPCamera anywhere in the house, plug it to a power
outlet and it will automatically switch ON. The HP Camera and
HomePlug AV adapter will connect with each other.
E
A
- Reset
F
B
- Simple Connect Button
G
C
- PLC LED
D
- Power LED
E
- Light Sensor Side Panel
F
- Lens
G
- IR LED Light
+
Add the PlugCam Camera
Three methods to add cameras
1.
Scan QR Code located on the
bottom of the HPCamera.
2.
Search the HPCamera over
the same local network.
3.
Manually
HPCamera's
password.
1
2
3
type
in
the
ID
and
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aztech HIPC700
Summary of Contents for Aztech HIPC700
-
Page 1: Package Contents
The HIPC700 Easy Start Guide is designed to get you up and running with your HIPC700 device. This Easy start Guide along with the User Manual which provides a more advanced guide to this product is downloadable on our Aztech Support Website (www.aztech.com/support). - Page 2 The HIPC700 Easy Start Guide is designed to get you up and running with your HIPC700 device. To download Aztech HPCam PC Software, please visit our official website (http://www.aztech.com/support/) for further information about this product. QR Code Scan (Ideal for camera at hand and for first time setups) Step 1 : Click Add Camera and choose “QR Code”...
Need help?
Do you have a question about the HIPC700 and is the answer not in the manual?
Questions and answers
I **** unable to connect to my device
To connect to your Aztech HIPC700 device, follow these steps:
1. Ensure you have a HomePlug AV adapter available for your camera.
2. Connect one end of an Ethernet cable to any LAN port on your router.
3. Connect the other end of the Ethernet cable to the LAN port of your HomePlug AV adapter.
4. Plug the HomePlug AV adapter into a power outlet.
5. Pair the camera with the HomePlug AV network by pressing the Simple Connect Button on both the IP Camera and the HomePlug AV adapter.
6. Use the plugCAM App on your smartphone (via 3G, 4G, LTE, or Wi-Fi) to monitor the camera.
This setup ensures a secure connection using your home’s powerline network.
This answer is automatically generated
It is not connecting to my device
The Aztech HIPC700 may not be connecting to your device due to the following reasons:
1. HomePlug AV Adapter Issue – Ensure that you have a HomePlug AV adapter properly connected to your router and power outlet.
2. Network Configuration – If you have an existing HomePlug AV network, another adapter may not be needed. Check if your network is correctly set up.
3. Pairing Issue – The camera requires pairing with a HomePlug AV-compliant device. Press the Simple Connect Button on both the IP Camera and the adapter to establish a connection.
4. Power Connection – Verify that the camera and adapter are properly plugged into a power outlet.
5. PlugCAM App Connection – Ensure that your smartphone is connected via 3G, 4G, LTE, or Wi-Fi and that the PlugCAM App is correctly configured.
6. Infrared LED and Motion Detection – If using these features for monitoring, confirm they are enabled and functioning.
If the problem persists, check the user manual for troubleshooting steps.
This answer is automatically generated