Advertisement
Using the Alarms and Hourly Time Signal
You can set the daily alarms in 1-minute increments. The watch
beeps for 10 seconds when the current time in the Timekeeping
Mode reaches the alarm time you set.
The Hourly Time signal causes the watch to beep every hour on
the hour.
❚ To display the alarm screen
In the Alarm Mode, press the D
D
D
D button to toggle the display
D
between the alarm screen and the Hourly Time Signal
screen.
When you enter the Alarm Mode, the screen that was displayed
when you last exited the mode appears first.
Alarm Screen
Hourly Time Signal Screen
• Alarm off
• Hourly Time Signal off
❚ To turn the alarm on or off
1.
In the Alarm Mode, use the D
D button to display the
D
D
D
alarm screen.
2.
Press the A
A button to toggle the alarm
A
A
A
on ("
" displayed) or off ("
" displayed).
Alarm Off
Alarm On
Alarm Time
❚ To stop the alarm beeper
Press any button.
❚ To test the alarm
In the Alarm Mode, hold down the D button to sound the alarm.
Operation Guide 3390
❚ To set the alarm time
1.
In the Alarm Mode, press
the D
D
D
D
D button to display
the alarm screen.
2.
A
A
Hold down the A
A button
A
for about two seconds.
• This will cause the hour digits
of the displayed alarm time to
flash.
• Displaying the setting screen
Hour
automatically turns on the
alarm.
❚ To turn the hourly time signal on or off
1.
In the Alarm Mode, use the D
D
D button to display the
D
D
Hourly Time Signal screen.
2.
Press the A
A button to toggle the Hourly Time Signal on
A
A
A
("
") or off ("
").
Hourly Time Signal Off
Hourly Time Signal On
3.
D
D
D (+) and B
B
B
B (–)
Use the D
D
B
buttons to change the
hour setting.
• Holding down either button
changes the setting at high
speed.
(Forward)
• When setting the hour, make
sure you specify AM (no
indicator) or PM (P) correctly
when using 12-hour
timekeeping, or that you
specify the correct 24-hour
time.
• The same 12-hour/24-hour
format you select for the
Timekeeping Mode home time
is also applied in the Alarm
Mode.
4.
C
C
Press the C
C
C button to
select the minute setting.
• This causes the minute digits
to flash.
Minutes
Configuring Home Time Settings
Home time settings include your Home City (the city where you
will normally use the watch), the current time and date in your
Home City, and other settings.
• Use the Timekeeping Mode to configure home time settings.
If you are planning to manually adjust both the digital and
analog settings, be sure to adjust the digital setting first.
❚ To configure home time settings
1.
In the Timekeeping Mode,
A button
A
A
hold down the A
A
for about two seconds.
• This will cause the city code
currently selected as the
Home City to flash on the
City Code
display.
(Back)
5.
D
D
D (+) and B
B
B
B (–)
Use the D
D
B
buttons to change the
minute setting.
• Holding down either button
changes the setting at high
speed.
6.
When the setting is the way you want, press the A
button.
• This exits the setting screen.
• The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
2.
Press the D
D
D
D
D button to
scroll through the city
codes until the one you
want to select is
displayed.
• See the "World Time City
TYO=Tokyo
Code List" for information
about city codes.
• Holding down either button
scrolls at high speed.
3.
When the city code you
want is displayed, press
the C
C
C button.
C
C
• This will display the summer
time (DST) setting screen.
(Back)
(Forward)
A
A
A
A
(Forward)
5
Advertisement
