Fujitsu fi-6670(A) Consumable Replacement And Cleaning Instructions page 7

R P R
EPLACING THE ICK OLLERS
• Install the new Separation
Roller onto the shaft. Make
sure to align the slot in the
roller collar with the screw in
the shaft.
• Install the new Pick Roller
onto the shaft.
Note:
Make sure that the belt is facing up and the wide plastic foot slides
into the groove in the bottom of the roller compartment.
Wide Plastic Foot
• Make sure to align the slot in the roller collar with the screw in the
shaft.
• Close the Pick Roller Cover.
• Close the ADF.
• Refer to "Resetting The Consumables Counters" later in this document
to reset the Pick Roller Counter.
fi-6670(A) & fi-6770(A) C
( .)
CONT
Make sure belt is facing up.
Groove
R
ONSUMABLE EPLACEMENT AND
C I
LEANING NSTRUCTIONS
7