Program Mode - ADJ 5P HEX/5P HEX PEARL User Instructions

5P Hex/5P Hex Pearl
• To run the 12 Channel Mode, press the MODE button until "Ch12"
is displayed. This is the 12 Channel DMX Mode.
4. Please see pages 13-16 for DMX values and traits.
5. After you have chosen your desired DMX Channel mode plug in
the fixture via the XLR connections to any standard DMX control-
ler.
RGBWA + UV Dimmer Mode:
In this mode you can adjust the individual colors to make your desired
color.
1. Plug the fixture in and press the MODE button until:
2. When "r.XXX" is displayed you are in Red dimming mode. Press
the UP and DOWN buttons to adjust intensity. After you have
finished adjusting the intensity, or you would like to skip to the
next color, press the ENTER button.
3. When "GXXX" is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. When "bXXX" is displayed you are in Blue dimming mode. Press
the UP and DOWN buttons to adjust intensity.
5. When "uXXX" is displayed you are in White dimming mode. Press
the UP and DOWN buttons to adjust intensity.
6. When "AXXX" is displayed you are in Amber dimming mode.
Press the UP and DOWN buttons to adjust intensity.
7. When "UXXX" is displayed you are in UV dimming mode. Press
the UP and DOWN buttons to adjust intensity.
Sound Active Mode:
In this mode the 5P Hex/5P Hex Pearl will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until "SoXX" is
displayed. "XX" represents the sound sensitivity level. Use the UP
and DOWN buttons to adjust the sensitivity. "00" is the lowest
sensitivity, "30" is the highest.

Program Mode:

In this mode you can choose 1 of 7 programs to run . The fade speed
and program speed are both adjustable.
1. Plug the fixture in and press the MODE button until "P-XX" is dis-
played. "XX" is the current program number displayed.
ADJ Products, LLC - www.adj.com - 5P Hex/5P Hex Pearl User Manual Page 8
Operating Instructions 5P Hex/5P Hex Pearl
2. Use the UP of DOWN button to find your desired program.
3. Press the ENTER button to adjust the fade speed, "00" being the
slowest, "30" the fastest.
4. Press the ENTER button again to adjust the color change speed,
"00" being the slowest, "30" the fastest.
Static Color Mode:
1. Plug the fixture in and press the MODE button until "C-XX" is
displayed. "XX" is the color number currently displayed.
2. There are 63 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons.
Activate RF Control:
This function is used to activate and deactivate the RF Remote
Control. When this function is activated you can control the fixture
using the Dotz Par RF remote. Please see the next page for remote
controls and functions.
1. Plug the fixture in and press the MODE button until "rFXX" is dis-
played. "XX" represents either "on" or "oFF".
2. Press the UP or DOWN buttons to either activate the remote func-
tion (On) or deactivate it (Off).
Dimmer Curve:
This is used to set the dimmer curve used with DMX mode. See the
Dimmer Curve chart on page 18 for more information.
1. Plug the fixture in and press the MODE button until the DMX
address is displayed.
2. Press the ENTER button until "dCXX" is displayed. This is the
dimmer setting. "XX" represents the current dimming mode.
3. Use the UP and DOWN buttons to find your desired dimmer
curve. Press ENTER when you are finished.
• dC00 - Standard
• dC01 - Stage
• dC02 - TV
• dC03 - Architectural
• dC04 - Theater
DMX State:
This mode is used as a precaution mode, that in case the DMX signal
is lost, the operating mode chosen in this setup is the running mode
ADJ Products, LLC - www.adj.com - 5P Hex/5P Hex Pearl User Manual Page 9
Operating Instructions