Fan Operation; Light Operation; Heater Operation - Hunter ceiling fan Owner's Manual

Remote Control (continued)
Light Heater
Reverse Switch
CAUTION:
• Always purchase the correct size and
grade of battery most suitable for the
intended use.
• Clean the battery contacts and also those
of the device prior to battery installation.
• Ensure the batteries are installed
correctly with regard to polarity (+ and -).
• Remove batteries from equipment which is
not to be used for an extended period of time.
• Remove used batteries promptly.

Fan Operation:

To start the fan, press the speed button on the remote
at the level you desire:
• 3 for high
• 2 for medium
• 1 for low
To turn off the fan, press 0.

Light Operation:

The light button is used to turn on, dim, and turn off
the light.
To Turn the light on:
• Press the light button 1 time and the light will
come on to the previously set level.
To dim the light:
• Press and hold the light button until the light has
reached the desired level. (As you hold the button,
the light level will move throughout its entire
range within 16 seconds.) Release the button at the
desired level.
To Turn the light off:
• Press the light button 1 time for gradual off and
the light will dim automatically for approximately
20 seconds until all the way off to allow for safe exit
from the room.
• Press the light button 2 times or 1 time while the
light is dimming for instant off.
17
M3514-01 • 02/19/13 • © Hunter Fan Company
www.HunterFan.com
Auto Resume Feature
This fan contains a receiver with an auto resume
feature. The receiver remembers the intensity of the
light, speed and direction of the fan, and whether
the heater is on or off. When power is restored to
the receiver, the fan, light, and heater will be at the
previous settings.

Heater Operation:

The heater button is used to turn on, and off the
heater.
• Press the heater button 1 time to turn the
heater on.
• Press the heater button again to turn the
heater off.
Note: Regardless of the speed setting on the fan,
when the ceiling fan is operating and the heater
function is turned ON, the ceiling fan automatically
switches to low-speed updraft only and will not
accept any commands from the remote until the
heater is turned off.
1.888.830.1326