AT&T TL92220 Quick Start Manual page 11

Bluetooth setup
Paired devices
All paired devices are stored on the Paired devices list. Up to four devices
(cell phones and headsets) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list
(page 2).
Once you have paired a device with the telephone base, you do not need
to repeat the pairing procedure again unless you delete the device from the
paired devices list.
NOTE: Only the first 5 characters of the device name are shown on the paired
devices list.
Rename a paired device
You can change the name of a paired device on the paired devices list.
. Press MENU/
CID
2. Press or
/SELECT.
MENU
. Press CID or
/SELECT.
press
MENU
4. Press CID or
necessary, then press
5. Press CID or
/SELECT. The screen displays ENTER NEW NAME.
MENU
6. Use the dialing keys to edit the name.
• Press
MUTE
• Press and hold
• Press CID
the right.
. Press /SELECT to confirm. The handset displays
MENU
Device renamed.
on the handset when it is not in use.
SELECT
DIR to highlight Bluetooth, then press
DIR to highlight Paired devices, then
DIR to highlight a device when
/SELECT.
MENU
DIR to highlight Rename, then press
/DELETE to erase a character.
/DELETE to erase all characters.
MUTE
to move the cursor to the left or
0
Answering sys
Directory
Cal l log
Intercom
Bluetooth
BLUETOOTH
Add cel lular
Add headset
Active devices
Paired devices
SELECT DEVICE
Headset A
Cel l Phone
DIR to
Disconnect
Rename
Remove paired
ENTER NEW NAME
Headset A _
AC