Preparing The Furniture Front - Miele KF 1801 Vi Operating And Installation Instructions

Connect the appliance to the water
inlet hose (see "Mains water
connection").

Preparing the furniture front

To ensure the correct alignment of
the furniture fronts, it is vital to fix the
upper furniture door before fixing
the lower one.
^ Load the door shelves in the
refrigerator door.
^ Open the appliance door as far as it
will go.
^ Unscrew the installation aids l and
angle trim m from the door.
^ Put the angle trim m and screws in a
safe place - they will be required
later.
^ Take the cover off the light contact
switch.
^ Close the appliance door.
^ Measure gap X between the
adjusting bar and the upper edge of
the adjacent furniture front.
^ Remove the two nuts from the
appliance door, and place them in a
safe place - they will be required
later.
^ Place the furniture front on a firm
surface, with the external side facing
downwards (place on a blanket or
similar to avoid it becoming
scratched).
Installation
87