Pride Go-Chair Owner's Manual page 22

I V . A S S E M B L Y / D I S A S S E M B L Y
TOGGLE LATCH
RELEASE BUTTON
Figure 11. Toggle Latch Closed
Figure 13. Rear Section Positioning
4. Secure the toggle latch to the locked position. See figure 11.
WARNING! Ensure that the toggle latch buckle is
securely fastened to the retainer before operating
the Go-Chair.
5. Grasp the foot platform and lower the assembled frame sections to
the floor.
6. With the battery box tilted forward slightly, place it on the power
base, then push the back of the battery box down until it is firmly
in place.
7. Install the seat and plug the controller connector into the power
base. See figure 6.
22 www.pridemobility.com
Figure 12. Toggle Latch Open
CURVED LOCKING
BRACKET
Figure 14. Align Frame Sections
Figure 15. Lift Front Section
PEG
Go-Chair