Gb Gb; Alarm Codes - Zanotti DFZ Use And Maintenance Instructions

Alarm code Description
A01 Water temperature alarm
A02 Oil pressure alarm
A03 Thermal relay alarm
A04 Pressure switch alarm
A05 Low battery level alarm
A06 Damaged room sensor alarm
A07 Damaged defrost sensor alarm
A08 Starting failure/damaged alternator
A09 High/low temperature alarm
A10 Radiator water level alarm
A11 Oil level alarm
A12 Air filter alarm
A13 Oil filter alarm
A14 Power card not present
A15 Damaged condensing sensor alarm
A16 Damaged water sensor alarm
A17 Door switch open alarm
A01 Water temperature alarm
This occurs when the radiator's water temperature exceeds the permitted value.
It turns off the diesel engine until the temperature returns to normal values.
A02 Oil pressure alarm
This alarm occurs if the engine's oil pressure drops; it permanently turns off the
diesel engine. To start the machine again, the alarm must be reset using the pro-
cedure described in the paragraph above and by pressing the
A03 Thermal relay alarm
This alarm occurs if abnormal electric motor current input values occur and it
turns off the machine. To reset the alarm, the machine must be de-energized, the
electrical switchboard must be opened, and the thermal relay must be reset by
pressing the blue button. Then close the switchboard and energize the machine
again. Go to the driver's cabin control and press the
Type
Automatic reset
Manual reset
Manual reset
Automatic reset
Automatic reset
Manual reset
Warning only
Manual reset
Warning only
Warning only
Warning only
Warning only
Warning only
Automatic reset
Warning only
Warning only
Automatic reset
ON/OFF key.
ON/OFF key.
GB
GB
71