Continuous Operation; Disabling Diesel Operation - Zanotti DFZ Use And Maintenance Instructions

4.8.1 Continuous operation

This function allows the start/stop function of the Diesel motor to be
cut-out and kept in motion in a continuous way; to activate this function starting
from the main window press the key , the following window appears:
then press the key , instead of , will appear on the display indicating
activation of the continuous function.

4.8.2 Disabling Diesel operation

If there is a power failure during electric operation, after a certain period the
Diesel motor comes on automatically. There are, however, circumstances in
which this automatic working must be prevented, for example during transport by
ship.
The procedure to be carried out is as follows: starting from the main window,
press the key and then the key , therefore the following window appears:
now press and the cursor will begin to flash at NO, press the up key to enter
YES; lastly, confirm the value entered by pressing the key .
In this way the Diesel function is inhibited and in the event of power failure, the
main window will be as follows:
66