Operation
Room Monitor can be temporarily disabled by pressing
If no further operation is performed for 45 seconds then the temporary disable
mode ends and Room Monitor mode re-activates.
1.
Press
six times.
2.
Press
or
The 5 Room Monitor levels are from 1 (High sensitivity) to 4 (Low
sensitivity) and Off.
3.
Press and hold
•
If using this feature as Baby Monitor please note it is not a
replacement for regularly checking the safety and security
of children.
•
The operating time is limited to the remaining charge of the
battery and is not suitable for continuous overnight use.
NOTE
•
If there is any input at EXT SP MIC JACK, Room Monitor
automatically turns off.
Busy Channel Lockout
This feature prevents accidental transmission on a busy channel. For
example, BCL is used when CTCSS or DCS is selected to prevent
transmission when the radio detects a transmission from another unit
using the same CTCSS or DCS code.
1. Press
seven times. The current BCL setting flashes.
2. Press
to select desired setting.
or
3. Press and hold
UNIDEN UH720SX-NB/UH710SX-NB
to select desired setting.
to save and exit.
to save and exit.
22
or holding
.
UHF CB Radio