Operation
Room Monitor can be temporarily disabled by pressing
If no further operation is performed for 45 seconds then the temporary disable
mode ends and Room Monitor mode re-activates.
1.
Press
six times.
2.
Press
or
The 5 Room Monitor levels are from 1 (High sensitivity) to 4 (Low
sensitivity) and Off.
3.
Press and hold
•
If using this feature as Baby Monitor please note it is not a
replacement for regularly checking the safety and security
of children.
•
The operating time is limited to the remaining charge of the
battery and is not suitable for continuous overnight use.
NOTE
•
If there is any input at EXT SP MIC JACK, Room Monitor
automatically turns off.
Busy Channel Lockout
This feature prevents accidental transmission on a busy channel. For
example, BCL is used when CTCSS or DCS is selected to prevent
transmission when the radio detects a transmission from another unit
using the same CTCSS or DCS code.
1. Press
seven times. The current BCL setting flashes.
2. Press
or
3. Press and hold
UNIDEN UH720SX-NB/UH710SX-NB
to select desired setting.
to save and exit.
to select desired setting.
to save and exit.
22
or holding
.
UHF CB Radio