Step 4. Turning On The Hearing Aid; Step 5. Inserting The Hearing Aid - Phonak Ambra User Manual

4. Using the hearing aid

Step 4. Turning on the hearing aid

Switch on the hearing aid by closing the battery
compartment (Fig. 4).
Fig. 4
Open and close the battery compartment gently
and carefully.
Check if you feel resistance when closing the
battery compartment. Check to make sure the
battery is correctly inserted and in the correct
direction. If the battery is inserted the wrong
way, the hearing aid will not work and the
battery compartment can be damaged.
16
The hearing aid is now switched on. It can take up
to 15 seconds before it starts. (When you wear the
hearing aid, you will hear an acoustic signal).

Step 5. Inserting the hearing aid

This step shows you how to correctly insert the hearing
aid. The instructions apply for all hearing aid models.
The type of earmold determines how the hearing aid is
inserted.
Each hearing aid is individually programmed for
your right or left ear. For the first step identify
right and left so you will be able to insert your
hearing aid in the correct ear.
17