Radio Operation - Kenwood XD-A75 XD-A55 Instruction Manual

RADIO OPERATION

1
2,3,
5,6
4
1
After use :
Press the POWER / ON/STANDBY button to enter
the standby mode
Note :
•
The last station turned in will be recalled, even
after changing the tuning band or the function,
or after switching the unit to the standby mode.
18
EN
Tuning
1
2
3
4
Manual tuning :
Press the TUNING/TIME (%UP or fiDOWN) button
4 as many times as required to adjust the frequency
shown on the display to the frequency of the de-
sired station.
Auto tuning :
When the TUNING/TIME (%UP or fiDOWN) button
is pressed for more than 0.5 second, scanning will
start automatically and the tuner will stop at the
first receivable broadcast station.
Notes :
•
2,3,
5,6
•
•
5
•
6
•
Press the POWER / ON/STANDBY button to turn
the power on.
Press the TUNER (BAND) button.
Press the TUNER (BAND) button to select the
desired frequency band. (FM ST, FM or AM)
Press the TUNING/TIME (%UP or fiDOWN) but-
ton to tune into the desired station.
When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically
at that point.
If a weak station signal is found during auto scan
tuning, the station will be skipped.
To stop the auto tuning, press the TUNING/TIME
(%UP or fiDOWN) button again.
To receive an FM stereo transmission, press the
TUNER (BAND) button so that the "ST. " indica-
tor on the display lights up.
" " will light up when an FM broadcast is in
stereo.
If the FM reception is weak, press the TUNER
(BAND) button so that the "ST. " indicator goes
off.
The reception changes to mono, the sound be-
comes clearer.