Using The Radio; Tuning In Radio Stations; Auto Preset; Manual Preset - Kenwood CLX-70 Instruction Manual

Using the radio

Tuning in radio stations

1
Press TUNER button to select the desired
waveband: FM or AM.
2
Press and hold 4 or ¢ button to tune in to
the desired frequency.
⁄
• To tune to a weak station, briefly press 4 or ¢ button
repeatedly until the display shows the desired frequency or
when the best reception has been obtained.
STEREO/MONO
Press the STEREO/MONO button to select mono or
stereo mode.
When stereo mode is selected, the icon "STEREO"
appears on the display (if current station is FM
stereo).
⁄
• You are able to select stereo or mono mode in FM band only.

Auto preset

Radio stations can be preset automatically in preset
channels.
1
Press TUNER button to select the desired
waveband: FM or AM.
2
Press MEMORY/REPEAT button for more than 2
seconds.
The receivable radio stations are preset
automatically.
When the Auto preset operation has completed,
the unit enters the condition in which preset
station P01 is tuned.
16
CLX-70

Manual preset

You can store up to 30 for FM and 10 for AM radio
stations in the memory. When a preset radio stations
selected, the preset number appears on the display.
1
Press TUNER button to select the desired
waveband: FM or AM.
2 Press 4 or ¢ button to tune in to the
desired frequency.
3
Press MEMORY/REPEAT button so that "P – –"
appears on the display.
4
If you want to store the radio station to another
preset number, press FOLDER/P.CALL A or B,
or digit buttons 0–9 to select the desired preset
number.
5
Press ENTER button again to store the radio
station.
6
Repeat steps 2 to 5 to store other preset radio
stations.
⁄
• During preset, if no button is pressed within 20 seconds, the
system will exit preset mode automatically.

Tuning to a preset radio station

Press FOLDER/P.CALL A or B, or digit buttons 0–9
to select the desired preset number.
The preset number and radio frequency appear on
the display.
⁄
• Press the digit buttons as shown below:
FM
To select 1 1 and ENTER
To select 2 2 and ENTER
To select 10 1, 0 and ENTER
AM
1 and ENTER
2 and ENTER
1, 0 and ENTER