RADIO OPERATION
1
2,4,
5
3
3
1
2,4,5
Tuning
1
Press the
ON/STANDBY button to turn the
power on.
2
Press the TUNER (BAND) button to select the
desired frequency band. (FM ST, FM or AM)
3
Press the TUNING/TIME (%UP or fiDOWN) but-
ton to tune into the desired station.
Manual tuning :
Press the TUNING/TIME (%UP or fiDOWN) button
as many times as required to adjust the frequency
shown on the display to the frequency of the de-
sired station.
Auto tuning :
When the TUNING/TIME (%UP or fiDOWN) button
is pressed for more than 0.5 second, scanning will
start automatically and the tuner will stop at the
first receivable broadcast station.
Notes :
•
When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically
at that point.
•
If a weak station signal is found during auto scan
tuning, the station will be skipped.
•
To stop the auto tuning, press the TUNING/TIME
(%UP or fiDOWN) button again.
4
To receive an FM stereo transmission, press the
TUNER (BAND) button so that the "ST. " indica-
tor on the display lights up.
•
"
" will light up on the display when an FM
broadcast is tuned in stereo.
5
If the FM reception is weak, press the TUNER
(BAND) button so that the "ST. " indicator goes
off.
•
The reception changes to mono, the sound be-
comes clearer.
After use :
Press the
ON/STANDBY button to enter the
standby mode
Note :
•
The last station turned in will be recalled, even
after changing the tuning band or the function,
or after switching the unit to the standby mode.
19
EN