How To Use The Built-In Timer - Kenwood XD-A75 XD-A55 Instruction Manual

HOW TO USE THE BUILT-IN TIMER

•
Before setting the timer, make sure that the clock setting is correct. (page 11)
STANDBY/TIMER
POWER
ON/STANDBY
VIDEO/AUX
TUNER
(BAND)
CD
TAPE (A/B)
MEMORY
/SET
TIMER
CD
BAND / TUNER
POWER
4
5
24 EN
TIMER
MEMORY/
SET
VOLUME
CONTROL
TUNING/
TIME (%UP
fiDOWN)
TUNING/TIME
(fi %)
VIDEO / AUX
TAPE (A/B)
VOLUME
Timer playback
1
Press the POWER / ON/STANDBY button to turn
the power on
2
Press the CD, TUNER (BAND), TAPE (A/B) or
VIDEO/AUX button to select the desired func-
tion, and then adjust the sound volume using
the VOLUME CONTROL.
3
Press the TIMER button repeatedly until "
is displayed.
4
Press the TUNING/TIME (%UP or fiDOWN) but-
ton to set the hour start time, then press the
MEMORY/SET button.
5
Press the TUNING/TIME (%UP or fiDOWN) but-
ton to set the minute start time, then press the
MEMORY/SET button.
•
The unit will enter the standby mode automati-
cally, and the STANDBY/TIMER indicator will light
up.
6
When the preset time is reached, the timer play-
back will start.
•
The volume will increase gradually.
Notes :
•
When performing timer playback using an exter-
nal unit connected to the VIDEO/AUX socket,
only the power of the main unit will be turned
off automatically. (The power of the external unit
will not be turned off.)
•
If you select CD or TAPE, the unit will enter the
standby mode after the playback. If you select
TUNER or VIDEO/AUX, it will enter the standby
mode one hour after the timer playback starts.
"