Installer And Service Menu (I/S); How To Use The Control Panel - IVT Optima 1000 Assembly, Commissioning And Maintenance Manual

Installer and service menu

Installer and service menu (I/S)

As the installer you have your own section of menus for settings, e.g. for
commissioning. These are accessed from the control panel by holding
down the menu button for approximately ten seconds.
The menu displays are divided into lines and each display has a number
to make it easy to fi nd. If there is no activity for 30 minutes the heat pump
automatically returns to Customer level 1.
The installer level also includes Customer levels 1 and 2. Note that the
menu displays are also linked to the selected operating mode. This means
you will never see windows that concern anything else but the selected
operating mode.

How to use the control panel

Start the heat pump with the help of the control panel's function keys and f
applicable menu selections.
Here follows an example of how to use the control panel. The example
shows how you move to menu 5.13 and confi rm the external sensors. You
will also fi nd more information about the control panel under the heading
Control Panel in the User section of the manual.
1. Press the menu button for approximately ten seconds until Access =
SERVICE is shown on the menu display. Now press the Menu button.
2. Menu Indoor temperature settings (menu 1) is shown.
3. Turn the menu dial clockwise (to the right) until you come to the
menu Commiss./Service for installer (menu 5). Now press the Select
button.
4. Menu Select operating mode A B (menu 5.1) is shown.
5. Turn the menu dial clockwise until you reach the menu Connected
extra sensor in op. (menu 5.13). Now press the Select button.
6. Menu Extra sensor(s) is shown. Confirm the extra sensors that you
have connected by pressing the Confirm button.
7. The text Confirming... is briefly shown in the menu display. This
means your setting is being registered in the heat pump.
8. When the setting has been registered the previous menu is shown.
Press the Return button twice to return to the main menu.
The installer and service menu (I/S) is
only for installers. Under no circum-
stances may the user access this level.
54
Warning
Rego603 I/S
040216 16:08:15 Tu
Heat Info Menu
(10 sec)
Main menu
Indoor temperature
settings 1
Return Select
Main menu
Commiss./Service
for installer 5
Return Select
Commiss./Service
Select operating
mode A B 5.1
Return Select
Commiss./Service
Connected extra
sensor in op. 5.13
Return Select
Extra sensor(s)
GT4 GT5
Return ConÞ rm
Extra sensor(s)
ConÞ rming...
Extra sensor(s)
GT4 GT5
Return ConÞ rm