Program Scan; Setting Scan Limits - Kenwood TM-V708A Instruction Manual

PROGRAM SCAN

Program Scan is identical to VFO Scan except that you
select the frequency range of the scan.
1 s
9
■

Setting Scan Limits

You can store up to 10 scan ranges in memory
channels L0/U0 to L9/U9.
1 Select your desired band.
2 Press [VFO].
3 Select your desired frequency for the lower limit.
4 Press [F].
• A memory channel number appears and blinks.
5 Turn the Tuning control, or press Mic [UP]/
[DWN], to select a channel (L0 ~ L9).
50
6 Press [M.IN].
• The lower limit is stored in the channel.
7 Select your desired frequency for the upper limit.
8 Press [F].
9 Turn the Tuning control, or press Mic [UP]/
[DWN], to select a matching channel (U0 ~ U9).
• For example, if you have selected L3 for the lower
limit in step 5, select U3 for the upper limit.
10 Press [M.IN].
• The upper limit is stored in the channel.
To confirm the stored scan limits, press [MR], then
select the L and U channels.
Note:
◆
The lower limit must have a lower frequency than the upper
limit.
◆ The lower and upper frequency step sizes must be the same.
◆ The lower and upper frequency limits must be selected on the
same band.