Visual Scan; Selecting The Number Of Channels - Kenwood TM-V708A Instruction Manual

VISUAL SCAN

While you are receiving, Visual Scan allows you to
monitor frequencies near the current operating
frequency. Visual Scan graphically and simultaneously
shows how all frequencies in the selected range are
busy. You will see up to 21 segments, for each channel,
that represent 7 S-meter levels (3 segments per level).
Determine the scan range by selecting the center
frequency and the number of channels. The default
number of channels is 61.
Mode 1 (31 ch)
7
6
5
4
3
2
1
Cursor
Move the cursor
to this position to
receive this signal
Mode 2 (61 ch)
7
6
5
4
3
2
1
■
Frequency channel
Frequency channel

Selecting the Number of Channels

1 Press [MNU] to enter Menu mode.
2 Press [c c c c c ]/ [d d d d d ] to select "AUX (1–9–)", then press
[OK].
3 Press [c c c c c ]/ [d d d d d ] to select "VISUAL SCAN (1–9–2)",
then press [OK].
4 Press [c c c c c ]/ [d d d d d ] to select 31, 61 (default), 91, or
181 channels.
5 Press [OK] to complete the setting.
6 Press [MNU] to exit Menu mode.
9
45