Table of Contents
Advertisement
Available languages
Available languages
out the remaining water. To do so, follow the water removal instructions
as outlined in the maintenance of the boiler section.
THIS MODEL IS PROVIDED WITH THE
FOLLOWING FEATURES
RED CONTROL LIGHT (4)
sound in case you did not see the red light. A continuous humming sound from the
pump comes before this. At this point switch off the steam cleaner by turning it to
STEAM REGULATION (ON HANDLE)
PRESSURE GAUGE (8)
The pressure gauge indicates the operating pressure of the steam cleaner. If the
needle is in the green section, the product is operating normally. If the needle
is continuously in the red section, reduce amount of steam being used, if this does
not correct the problem the steam cleaner may require service. Please contact
the place of purchase for service.
USING THE ACCESSORIES
CONNECTING THE ACCESSORIES
the same way. If they do not snap, tighten connection until they do.
in the following way: hold the brush in one hand with the bristles pointing down while
with the other hand inserts the angle adapter into the brush pointing it downward.
After this, turn the angle adapter 180°. To remove it, follow the procedure in the
opposite direction.
LARGE BRUSH
the large brush. Attach a dry cloth to the brush for the most effective cleaning.
06
Advertisement
Table of Contents
