Filling The Tank; Maintenance Of The Boiler; Cleaning Instructions - Reliable Enviromate T730A Instruction Manual

Steam cleaning system with css

Hide thumbs Also See for Enviromate T730A:

Table of Contents

Available languages

HIGH PRESSURE NOZZLE WITH SMALL ROUND

BRUSH ( NYLON, BRASS, STAINLESS STEEL )

The high-pressure nozzle can be used with or without one of the small round

using the brushes to prevent damage or scratching.

The use of the steam nozzle alone is particularly good for cleaning and degreas-

rims, pet areas etc.

The nylon brush, because of its softness, is ideal for removing the dirt in grout,

to be careful not to scratch the surface.

fully using the brass brush may give the best results.

steel brush that is available through your dealer.

When using the steam nozzle with or without the brushes, you will need a cloth to

wipe up the moisture and dirt that has been lifted through cleaning.

FILLING THE TANK

anytime during the cleaning operation.

To maintain your steam cleaner in good condition and to ensure constant perfor-

mance, we recommend that you periodically clean the boiler once or twice a year

depending on the hardness of the water:

ATTENTION: Before cleaning the boiler with the supplied de-scaling powder, please

make sure that the boiler is at room temperature, that it has not been used for at

least 8 hours, and that the boiler is disconnected from the power source.

Table of Contents