Using The Radio In Different Repeater Areas - Tait TM8110 Operator's Manual

Using the radio in different repeater areas

Your radio may have a group of channels programmed as a
voting group. The channels in the voting group all carry the
same traffic, but from different repeaters. As your radio
moves in and out of different repeater coverage areas, the
best communication channel is automatically selected for
you to use, until a better communications channel is selected.
While voting is active, the amber LED glows and the
display shows:
■
■
■
Activating voting
Voting can be activated by selecting a voting group (see
"Selecting a channel or group" on page
function key programmed for voting.
Suspending a channel from a voting group
You may be able to use the function key programmed for
nuisance delete to temporarily delete one of the channels
from the voting group.
When that voting group is next selected, or after the radio has
been turned off and then on, the deleted channel is again
part of the voting group.
Alternatively, the function key programmed for voting may be
programmed so that a short key press turns on voting, and a
long key press activates nuisance delete.
■
the transmit channel,
the voting group number, or
or .
Press and hold the function key programmed for voting to
remove the current channel from the voting group.
22) or by using a
Basic operation 31