Using The Cassette; Playing A Cassette Tape; Recording On A Cassette Tape - Kenwood M-707i-B Instruction Manual

Using the cassette

Playing a cassette tape

1
Press TAPE mode [TAPE mode] button to TAPE.
2
Press the area marked [push open] to open the
cassette tape door.
3
Insert cassette tape into the compartment with
the open edge facing down.
4
Close the door securely.
5
Press TAPE mode [TAPE mode] button to select
the desired reverse mode.
icon : plays both sides and stops.
icon : plays both sides endlessly.
icon : plays only one side of the tape and
stops.
6 Press SEARCH/TUNING 4 or ¢ [4 or ¢
search +/–] button to move tape to the desired
starting point.
7 Press FWD PLAY 3/8 [3/8] or RVS PLAY 2/8
[2/8] button to begin playing the tape.

Recording on a cassette tape

You can record from a radio, a CD, a audio fi le, or a
iPod.
For the best recording, use a normal bias tape (Type
1 only).
Recording from a radio
1
Insert a cassette tape into the tape
compartment and close the door.
2
Press TUNER band [TUNER band] button to
TUNER and select a radio station.
3
Press TAPE REC [TAPE rec] button to set the unit
into recording standby mode.
The icon "TAPE REC" appears on the display.
4
Press FWD PLAY 3/8 [3/8] or RVS PLAY 2/8
[2/8] button to begin recording.
⁄
• To end recording, press 7 [7 stop] button.
• To temporarily pause the recording, press FWD PLAY 3/8
[3/8] or RVS PLAY 2/8 [2/8] button. Press it again to
resume recording.
Recording from a CD/ audio fi le
1
Insert a disc or a USB device.
2
Insert a blank cassette tape into the tape deck.
3
Press the desired source button to select the
source you want to record from.
For CD/ audio fi le-CD : Press CD/USB [CD/USB]
button to select CD input.
For USB device : Press CD/USB [CD/USB] button to
select USB input.
4
To record all the tracks/fi les:
Stop playback.
To record a single track/fi le:
Play the track/fi le to be recorded.
5
Press TAPE REC [TAPE rec] button to set the unit
into recording standby mode.
The icon "TAPE REC" appears on the display.
6
Press FWD PLAY 3/8 [3/8] or RVS PLAY 2/8
[2/8] button to begin recording.
The icon "SYNC" appears on the display.
⁄
• To ensure good system performance, wait until the unit
completely reads the disc/USB device before recording.
• To temporarily pause the recording, press FWD PLAY 3/8
[3/8] or RVS PLAY 2/8 [2/8] button. Press it again to
resume recording.
• To end recording, press 7 [7 stop] button.
• During recording, it is not possible to listen to another source.
Program recording from a CD/ audio fi le
Desired CD tracks/ audio fi le can be programmed in
the desired sequence and recorded onto a tape.
1
Insert a disc or a USB device.
2
Insert a blank cassette tape into the tape deck.
3
Press the desired source button to select the
source you want to record from.
For CD/ audio fi le-CD : Press CD/USB [CD/USB]
button to select CD input.
For USB device : Press CD/USB [CD/USB] button to
select USB input.
4
Make sure that the unit is in stop mode.
continued to next page
19
English