Table of Contents
Advertisement
Getting Started
HSG327 supports web-based configuration. Upon the completion of hardware installation,
HSG327 can be configured through a PC by using its web browser with JavaScript
enabled such as Internet Explorer version 6.0.
Default LAN interface IP address:
LAN1 (192.168.1.254) are mapped to Private Zone, no authentication required for users.
LAN2 (192.168.11.254) are mapped to Public Zone, authentication required for users.
Note:
Steps:
1. Once the hardware installation is complete, set DHCP in TCP/IP settings of the
administrator PC to "Obtain an IP address automatically". Connect the PC to the
LAN1 Port of HSG327. An IP address will be assigned to the PC automatically via the
HSG327 built-in DHCP server.
2. Launch a web browser to access the web management interface of HSG327 by
entering "https://192.168.1.254" or "http://192.168.1.254" in the address field.
Note:
3. The following Administrator Login Page will then appear. Enter "admin" (the default
value) in the Username and Password fields, and then click Login to log in.
Copyright © 4IPNET, INC. All rights reserved.
The instructions below are illustrated with the administrator PC
connected to LAN1.
"https" is used for a secured connection.
HSG327 Wireless Hotspot Gateway ENGLISH
4
Quick Installation Guide
Advertisement
Table of Contents
