Getting Started - 4IPNET HSG326 Quick Installation Manual

Getting Started

HSG326 supports web-based configuration. Upon the completion of hardware installation,
HSG326 can be configured through a PC by using its web browser with JavaScript enabled such
as Internet Explorer version 6.0.
Default LAN interface IP address:
LAN1 & LAN2 (192.168.1.254) are mapped to Default Service Zone for administrator usage.
Note:

Steps:
1. Once the hardware installation is complete, set DHCP in TCP/IP settings of the administrator
PC to "Obtain an IP address automatically". Connect the PC to the LAN1 Port of HSG326. An
IP address will be assigned to the PC automatically via the HSG326 built-in DHCP server.
2. Launch a web browser to access the web management interface of HSG326 by entering
"https://192.168.1.254" or "http://192.168.1.254" in the address field.
Note:

Copyright © 4IPNET, INC. All rights reserved.
The instructions below are illustrated with the administrator PC
connected to LAN1.
"https" is used for a secured connection.
HSG326 Wireless Hotspot Gateway ENGLISH
7
Quick Installation Guide