Connection Of Other Accessories; (Commercially Available Parts) - Kenwood HM HM-332 Instruction Manual

8

Connection of other accessories

CAUTION
Note on Connection
Connect the components as shown in the diagram.
Only plug the power cord into a power outlet once
connections are completed.
Optical fiber cable
cap
Audio cord
Audio output
VCR, Analog turntable with
built-in RIAA equalizer (optional
P-110), etc.
1.In case an associated system component is connected, also read the instruction manual of the component.
2.Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be produced
Notes Notes
or noise may interfere.
3.Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If
connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may
result.
DIGITAL OUT jack (OPTICAL)
The DIGITAL OUT jack (OPTICAL) outputs
the CD signal.
The CD signal can be recorded in digital
DIGITAL OUT
OPTICAL
format by connecting a recorder to the
DIGITAL IN jack (OPTICAL).
If necessary, remove the cap and plug the
optical fiber cable (optical)
L
A U X
L I N
R
A U X
I N
R
DIGITAL OUT
OPTICAL
MD recorder or DAT etc.

(Commercially available parts)

FM outdoor antenna
Lead the 75
nected to the FM outdoor an-
tenna into the room and connect
it to the FM 75 terminal. Please
remove the indoor antenna after
an outdoor antenna has been in-
stalled.
ANTENNA
AM
GND
FM
75
SPEAKERS(6–16 )
+
-
Antenna adaptor
R L
(optional)
POWER cord
TO WALL AC OUTLET
System connection
coaxial cable con-