Various Cd Playback Features; Listening In The Desired Sequence (Program Playback) - Kenwood HM HM-332 Instruction Manual

Various CD playback features

26
Listening in the desired sequence
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the CD input.
1
Let the "PGM" indicator light.
Press in stop mode
2
Select track numbers in the order you
want to play them.
1 Select the track.
2 Confirm the selection.
( To select more than one track,
repeat steps 1 and 2 for each
track.)
3
Start playback.
To stop playback
PGM
AUTO/MONO
SET
CD /
To quit the program mode
Clearing tracks from the end
STOP
--
(P-5 has been deleted.)
÷ Each time the key is pressed, the
last track in the program is cleared.
(program playback)
Lights
PGM
C
Selection of tracks
PGM
Press the numeric keys as shown below....
To select track No. 23 : 003
To select track No. 40 : 0000)
÷ A track can also be selected using the 4 or ¢ key.
÷ Up to 32 tracks can be programmed. When "PROGRAM
FULL" is displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷ "– – : – –" is displayed when the total programmed
period has attained 100 minutes or more.
÷ Tracks will be played in the order they were programmed
(following the program numbers).
÷ When the 4 or ¢ key is pressed during play, the
program will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current track
being played.
Press in stop mode
CLEAR
P-05
CLEAR
-- P-01
D KENWOOD
Program position of the track
to be selected next.
05 P-01
Clearing the program
Press in stop mode
PGM
AUTO/MONO
÷ The entire program is cleared.