Kenwood HM HM-332 Instruction Manual page 21

One-by-one presetting
1 Press the ENTER key during reception.
(Proceed to step 2 while "MEMORY" is
lit.)
2 Select one of the preset numbers from
1 to 40.
P.CALL
3 Press the ENTER key again.
(Repeat steps 1,2,3 to preset other
stations)
Reception band indication
FM1
T
The "TUNED" indicator lights
when a station is received.
Lights at the time of auto-
matic station selection.
FM
T
Lights during stereo reception
÷ When a key is held depressed, preset stations will be
skipped at an interval of about 0.5 second.
÷ Preset stations can be called using the number keys on
the remote control unit.
(manual preset)
ENTER
ENTER
AUTO
87.50MHz
UNER P-- E
AUTO TUNED
87.50MHz
UNER P-- E
Frequency display
"MEMORY" lights (for approx. 20 sec.)
÷ A maximum of 40 stations of the band presently being
received will be preset.
÷ If several stations are preset under the same number, the
previous memory is replaced with the latest memory
contents.
Tuning mode switching and reception mode
(Remote control unit only)
Each press alternates the mode.
PGM
W
AUTO/MONO
Use the manual tuning mode when reception is
noisy due to weak reception. (In the manual mode,
stereo broadcasts are received in monaural.)
÷ Normally, use the AUTO (Auto tuning, stereo recep-
tion) mode.
W
Receiving broadcast station
AUTO
FM 87.50MHz
M EMORY P--
AUTO
FM 87.50MHz
M EMORY P01
1 "AUTO" lit
(Auto tuning, stereo reception)
2 "AUTO" not lit
(Manual tuning, monaural recep-
tion)
21
E W
E W