Receiving Broadcast Station - Kenwood HM HM-332 Instruction Manual

Receiving broadcast station

20
Up to 40 radio stations can be preset in memory.
Auto/manual station switching
One-by-one presetting
TUNER/band
1 1
4 ¢
3 3
TUNING
Preset call
1. Press the tuner/band key.
Preset a radio station in memory.
1FM
2AM
2. Preset a radio station in memory (auto preset or auto memory).
Follow the procedure in "Collective presetting of stations (auto
preset)" to preset automatically the tunable radio stations in your
area.
÷ Once stations are stored by auto preset, the present procedure is not
required from the next time, unless you move of house or re-execute
presetting of all tunable stations.
3. Tuning (Preset Call)
÷ If radio stations have already been stored with auto preset or manual preset,
select a station using the 4P.CALL¢ key. Each press of the same key
switches the preset stations in sequence.
When ¢ is pressed: 1=2=3 ... 38=39=40=1...
When 4 is pressed: 40=39=38 ... 3=2=1=40...
÷ To select a preset station from the remote, use the 4P.CALL¢ key or
numeric keys.
When no stations have been memorized
Auto tuning : The next broadcasting station will be received
automatically each time this key is pressed.
Manual tuning : Press the 1TUNING¡ key repeatedly until a
station is received. Or hold either key and release
it when the frequency of the desired station is
received.
When the "TUNER/band" key is pressed,
the unit will automatically be switched on
and reception status will be reached.
Collective presetting of stations
3
1 1
™