Appliance Front And Control Panel - Miele DG 4050 Operating And Installation Instructions

Appliance front and control
panel
The appliance front and controls should
be cleaned using a Miele E-Cloth or a
mild solution of hot water with a little
washing-up liquid, applied with a damp
cloth. Then wipe over with clean water,
and finally dry with a soft cloth.
See data plate for type of front. N.B.
Appliances with glass fronts are fitted
with an aluminium handle.
Glass
For appliances with glass fronts, a
proprietary glass cleaning agent may
be used.
Stainless steel
Stainless steel surfaces can be cleaned
using a Miele E-Cloth or with a
proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel.
To help prevent resoiling, a conditioning
agent for stainless steel can also be
used.
Follow the manufacturer's instructions.
See "Optional accessories" for details
of accessories for cleaning and care.
Cleaning and care
Aluminium
This material is susceptible to
scratching and to damage from alkalis
and acids. It is therefore essential to
clean it with care, as described above.
Do not use cleaning agents for
stainless steel or descaling agents on
these surfaces. Remove soiling immedi-
ately, as leaving it could result in the
surface discolouring or altering.
63