Cleaning And Care; Appliance Front And Control Panel - Miele H 4641 Operating Instructions Manual

Appliance front and control
panel
Clean the
– controls,
– door handle,
– trim inside the door
regularly, preferably after each use.
This will help to prevent grease and
other deposits adhering to the surfaces
and becoming difficult to remove and
also in some cases, causing
discolouration.
^ All surfaces and controls should be
cleaned using a Miele E-Cloth or with
warm water and a little washing up
liquid applied with a soft sponge or
cloth.
^ Wipe the surfaces dry using a soft
cloth.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals.

Cleaning and care

Do not use scouring agents, hard
sponges or brushes or sharp metal
tools to clean glass as these can
scratch the surface.
To prevent the risk of scratches and
damage to the surface structure of
glass, stainless steel and aluminium
fronted appliances, pay particular
attention to the following cleaning
instructions.
Glass fronted appliances
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– sharp metal tools,
– oven sprays.
51